View CLD-DSXX_8442906.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product family data sheet copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. CLD-DSXX rev 0 cree ? xlamp ? xp-e2 color leds product description the xlamp xp- e 2 color le ds build on the unprecedented performance of the original xp- e by increasing lumen output up to 10% while providing a single die l e d point source for precise optical control. the xp -e 2 color le ds share the same footprint as the original xp -e, providing a seamless upgrade path to more lumens and/or greater effciency while shortening the design cycle for existing xp customers. xlamp xp- e 2 color le ds are the ideal choice for lighting applications where high light output, maximum effcacy and precise optical control are required, such as led retroft lamps, outdoor lighting, portable lighting, or indoor directional lighting. features ? available in royal blue, blue, green, & red ? maximum drive current: up to 1 a ? low thermal resistance: as low as 5 c/w ? wide viewing angle: 130?135 ? unlimited foor life at 30 c/85% rh ? refow solderable ? jedec j?std?020c compatible ? electrically neutral thermal path www .cree.com/xlamp cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 table of contents characteristics .......................... 2 flux characteristics .................... 3 relative spectral power distribution ............................... 5 relative flux vs. junction temperature ............................. 6 e lectrical characteristics ............. 7 thermal design ......................... 8 relative flux vs. current ............ 9 typical spatial distribution ......... 10 refow soldering characteristics . 11 notes ...................................... 12 mechanical dimensions .............. 13 tape and reel .......................... 14 packaging ................................ 15 bin and order-code format ....... 16 performance groups C brightness ............................... 17 performance groups C radiant flux ........................................ 17 performance groups C dominant wavelength ............................. 18 performance groups C forward v oltage ................................... 18 standard order codes and bins .. 19 preliminary
2 characteristics characteristics unit minimum typical maximum thermal resistance, junction to solder point - royal blue, blue c/w 9 thermal resistance, junction to solder point - green c/w 15 thermal resistance, junction to solder point - red c/w 5 viewing angle (fwhm) ? royal blue, blue, green degrees 135 viewing angle (fwhm) ? red degrees 130 temperature coeffcient of voltage ? royal blue, blue mv/c -3.3 temperature coeffcient of voltage ? green mv/c ?3.8 temperature coeffcient of voltage ? red mv/c ?1.8 esd classifcation (hbm per mil? std?883d) class 2 dc forward current - royal blue, blue, green ma 1000 dc forward current - red ma 700 reverse voltage v 5 forward voltage (@ 350 ma) ? royal blue, blue v 3.1 3.25 forward voltage (@ 350 ma) ? green v 3.3 3.5 forward voltage (@ 350 ma) ? red v 2.2 2.5 forward voltage (@ 1000 ma) ? royal blue, blue v 3.4 forward voltage (@ 1000 ma) ? green v 3.8 forward voltage (@ 1000 ma) ? red v 2.65 le d junction temperature c 150 copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
3 flux characteristics (t j = 25 c) - color the following table provides several base order codes for xlamp xp- e2 color le ds. it is important to note that the base order codes listed here are a subset of the total available order codes for the product family. for more order codes, as well as a complete description of the order-code nomenclature, please consult bin and order-code format on page 16. color minimum radiant flux @ 350 ma dominant wavelength range order codes, group flux (mw) min. max. group dwl (nm) group dwl (nm) royal blue 30 450 d3 450 d5 465 xp ebry ?l1?0000?00j01 d3 450 d4 460 xp ebry ?l1?0000?00j02 d4 455 d5 465 xp ebry ?l1?0000?00j03 31 475 d3 450 d5 455 xpe bry-l1-0000-00k01 d3 450 d4 460 xpe bry-l1-0000-00k02 d4 455 d5 465 xpe bry-l1-0000-00k03 32 500 d3 450 d5 455 xpe bry-l1-0000-00l01 d3 450 d4 460 xpe bry-l1-0000-00l02 d4 455 d5 465 xpe bry-l1-0000-00l03 33 525 d3 450 d5 455 xp ebry ?l1?0000?00m01 d3 450 d4 460 xp ebry ?l1?0000?00m02 d4 455 d5 465 xp ebry ?l1?0000?00m03 34 550 d3 450 d5 455 xpe bry-l1-0000-00n01 d3 450 d4 460 xpe bry-l1-0000-00n02 d4 455 d5 465 xpe bry-l1-0000-00n03 35 575 d3 450 d5 465 xpe bry-l1-0000-00p01 d3 450 d4 460 xpe bry-l1-0000-00p02 color dominant wavelength range base order codes min. luminous flux (lm) @ 350 ma order code min. max. group dwl (nm) group dwl (nm) group flux (lm) blue b3 465 b6 485 k2 30.6 xpe bbl-l1-0000-00y01 k3 35.2 xpe bbl-l1-0000-00z01 m2 39.8 xpe bbl-l1-0000-00201 m3 45.7 xpe bbl-l1-0000-00301 note: cree maintains a tolerance of 7% on fux and power measurements and 1 nm on dominant wavelength measurements. copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
4 color dominant wavelength range base order codes min. luminous flux (lm) @ 350 ma order code min. max. group dwl (nm) group dwl (nm) group flux (lm) green g2 520 g4 535 q2 87.4 xpebgr -l1-0000-00a01 q3 93.9 xpe bgr-l1-0000-00b01 q4 100 xpe bgr-l1-0000-00c01 q5 107 xpe bgr-l1-0000-00d01 r2 114 xpe bgr-l1-0000-00e01 r3 122 xpe bgr-l1-0000-00f01 color dominant wavelength range base order codes min. luminous flux (lm) @ 350 ma order code min. max. group dwl (nm) group dwl (nm) group flux (lm) red r2 620 r3 630 n3 56.8 xpebrd-l1-0000-00501 n4 62.0 xpebrd-l1-0000-00601 p2 67.2 xpebrd-l1-0000-00701 p3 73.9 xpebrd?l1?0000?00801 note: cree maintains a tolerance of 7% on fux and power measurements and 1 nm on dominant wavelength measurements. flux characteristics (t j = 25 c) - color (continued) copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
5 relative spectral power distribution relative spectral power 0 20 40 60 80 100 380 430 480 530 580 630 680 730 780 relative radiant power (%) wavelength (nm) blue green red copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
6 relative flux vs. junction temperature (i f = 350 ma) relative flux output vs. junction temperature 0 10 20 30 40 50 60 70 80 90 100 25 50 75 100 125 150 relative radiant flux (%) junction temperature (oc) royal blue relative flux output vs. junction temperature 0 10 20 30 40 50 60 70 80 90 100 25 50 75 100 125 150 relative luminous flux (%) junction temperature (oc) blue green red junction t emperature (c) copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
7 electrical characteristics (t j = 25 c) electrical characteristics (tj = 85oc) 0 100 200 300 400 500 600 700 800 900 1000 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 forward current (ma) forward voltage (v) royal blue, blue green red copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
8 thermal design the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics . royal blue, blue green red thermal design - royal blue - same as blue 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 10 c/w rj - a = 15 c/w rj - a = 20 c/w rj - a = 25 c/w thermal design - green 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 20 c/w rj - a = 25 c/w rj - a = 30 c/w rj - a = 35 c/w thermal design - red 0 100 200 300 400 500 600 700 800 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 10 c/w rj - a = 15 c/w rj - a = 20 c/w rj - a = 25 c/w copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
9 relative flux vs. current (t j = 25 c) relative intensity vs. current (tj = 85oc) 0 50 100 150 200 250 0 100 200 300 400 500 600 700 800 900 1000 relative radiant flux (%) forward current (ma) royal blue relative intensity vs. current (tj = 85oc) 0 50 100 150 200 250 300 0 100 200 300 400 500 600 700 800 900 1000 relative luminous flux (%) forward current (ma) blue green red copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
10 typical spatial distribution typical spatial radiation pattern 0 20 40 60 80 100 - 90 - 70 - 50 - 30 - 10 10 30 50 70 90 relative luminous intensity (%) angle (o) royal blue, blue, green red copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
11 reflow soldering characteristics in testing, cree has found xlamp x p? e2 color leds to be compatible with jedec j? std? 020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of solder paste used. note that this general guideline may not apply to all p cb designs and confgurations of refow soldering equipment. profle feature lead-based solder lead-free solder average ramp ? up rate (ts max to tp) 3 c/second max. 3 c/second max. p reheat: temperature min (ts min ) 100 c 150 c p reheat: temperature max (ts max ) 150 c 200 c preheat: time (ts min to ts max ) 60-120 seconds 60?180 seconds time maintained above: temperature (t l ) 183 c 217 c time maintained above: time (t l ) 60-150 seconds 60-150 seconds p eak/classifcation temperature (tp) 215 c 260 c time within 5 c of actual p eak temperature (tp) 10-30 seconds 20-40 seconds ramp-down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note: all temperatures refer to topside of the package, measured on the package body surface. copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
12 notes lumen maintenance projections cree now uses standardized ies lm ?80? 08 and tm?21? 11 methods for collecting long? term data and extrapolating led lumen maintenance. for information on the specifc lm ? 80 data sets available for this led, refer to the public lm?80 results document at www.cree.com/xlamp_app_notes/lm80_results. p lease read the xlamp long? term lumen maintenance application note at www.cree.com/xlamp_app_notes/lumen_ maintenance for more details on crees lumen maintenance testing and forecasting. please read the xlamp thermal management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how thermal design, ambient temperature, and drive current affect the l e d junction temperature. moisture sensitivity in testing, cree has found xlamp x p? e2 color leds to have unlimited foor life in conditions 30 oc/85% relative humidity (rh). moisture testing included a 168 ? hour soak at 85 oc/85% rh followed by 3 refow cycles, with visual and electrical inspections at each stage. cree recommends keeping xlamp l e ds in their sealed moisture-barrier packaging until immediately prior to use. cree also recommends returning any unused l e ds to the resealable moisture-barrier bag and closing the bag immediately after use. vision advisory claim warning: do not look at exposed lamp in operation. eye injury can result. see led eye safety at www.cree.com/ xlamp_app_notes/led_eye_safety. copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
13 mechanical dimensions (t a = 25 c) all measurements are .13 mm unless otherwise indicated. anode anode size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 3.45 3.45 r 1.53 .65 .83 3.30 .50 2.30 3.30 1.30 2.36 1 / 1 22.000 a 2610-00029 outline drawing xpe g2 07/19/12 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 3.45 3.45 r 1.53 .65 .83 3.30 .50 2.30 3.30 1.30 2.36 1 / 1 22.000 a 2610-00029 outline drawing xpe g2 07/19/12 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 3.45 3.45 r 1.53 .65 .83 3.30 .50 2.30 3.30 1.30 2.36 1 / 1 22.000 a 2610-00029 outline drawing xpe g2 07/19/12 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 3.45 3.45 r 1.53 .65 .83 3.30 .50 2.30 3.30 1.30 2.36 1 / 1 22.000 a 2610-00029 outline drawing xpe g2 07/19/12 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 3.45 3.45 r 1.53 .65 .83 3.30 .50 2.30 3.30 1.30 2.36 1 / 1 22.000 a 2610-00029 outline drawing xpe g2 07/19/12 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) bottom view side view top view recommended pcb solder pad recommended stencil pattern hatched area is opening copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
14 tape and reel all cree carrier tapes conform to eia ? 481d, automated component handling systems standard. all dimensions in mm. loaded pockets (1,000 lamps) leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) start end cathode side anode side (denoted by + and circle) 160.0 a a b 2.5 .1 section a-a scale 2 : 1 1.5 .1 8.0 .1 4.0 .1 1.75 .10 12.0 .0 + .3 detail b scale 2 : 1 13 mm 7" cover tape pocket tape user feed direction user feed direction .30 [.012] t ao 3.7 +/-0.1mm +.10 +.0039 2.46 .096 ko -.00[ -.0000] 3.7 +/-0.1mm bo p2 2.00 [.079] po 4.00 [.157] 10.25 [.404] e2 1.50 +.10 +.0039 -.00[.0591-.0000]do 4.39 [.173] 4.39 [.173] 7.3 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 1.50 [.059] d1 8.00 [.315] p pocket size ao - 3.7mm +/-0.1mm bo - 3.7mm +/-0.1mm ko - 2.46mm +0.1/-0mm .30 [.012] t ao 3.7 +/-0.1mm +.10 +.0039 2.46 .096 ko -.00[ -.0000] 3.7 +/-0.1mm bo p2 2.00 [.079] po 4.00 [.157] 10.25 [.404] e2 1.50 +.10 +.0039 -.00[.0591-.0000]do 4.39 [.173] 4.39 [.173] 7.3 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 1.50 [.059] d1 8.00 [.315] p pocket size ao - 3.7mm +/-0.1mm bo - 3.7mm +/-0.1mm ko - 2.46mm +0.1/-0mm .30 [.012] t ao 3.7 +/-0.1mm +.10 +.0039 2.46 .096 ko -.00[ -.0000] 3.7 +/-0.1mm bo p2 2.00 [.079] po 4.00 [.157] 10.25 [.404] e2 1.50 +.10 +.0039 -.00[.0591-.0000]do 4.39 [.173] 4.39 [.173] 7.3 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 1.50 [.059] d1 8.00 [.315] p pocket size ao - 3.7mm +/-0.1mm bo - 3.7mm +/-0.1mm ko - 2.46mm +0.1/-0mm .30 [.012] t ao 3.7 +/-0.1mm +.10 +.0039 2.46 .096 ko -.00[ -.0000] 3.7 +/-0.1mm bo p2 2.00 [.079] po 4.00 [.157] 10.25 [.404] e2 1.50 +.10 +.0039 -.00[.0591-.0000]do 4.39 [.173] 4.39 [.173] 7.3 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 1.50 [.059] d1 8.00 [.315] p pocket size ao - 3.7mm +/-0.1mm bo - 3.7mm +/-0.1mm ko - 2.46mm +0.1/-0mm 13 61 12.40 0 + 2.00 measured at hub 12.40 measured at inside edge 16.40 sheet 1 of 1 1:2 2400-00005 size title rev. c drawing no. date date date check final protective finish material approved drawn by third angle projection .x 0.3 x 2 .xx .10 .x .25 for sheet metal parts only .xx .13 x 1 unless otherwise specified dimensions are in millimeters & before finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 361-4770 4600 silicon drive durham, n.c 27703 notice cree confidential. this plot and the information contained within are the proprietary and confidential information of cree, inc. this plot may not be copied, reproduced or disclosed to any unauthorized person without the written consent of cree, inc. reel, 7" x 12mm wide b liudezhi 2012/5/25 +/- 0.5 ps 190 ????1? ??e (c) by foxit software company, 2004 foxit pdf editor ?- od 7.5'' 13 61 12.40 0 + 2.00 measured at hub 12.40 measured at inside edge 16.40 sheet 1 of 1 1:2 2400-00005 size title rev. c drawing no. date date date check final protective finish material approved drawn by third angle projection .x 0.3 x 2 .xx .10 .x .25 for sheet metal parts only .xx .13 x 1 unless otherwise specified dimensions are in millimeters & before finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 361-4770 4600 silicon drive durham, n.c 27703 notice cree confidential. this plot and the information contained within are the proprietary and confidential information of cree, inc. this plot may not be copied, reproduced or disclosed to any unauthorized person without the written consent of cree, inc. reel, 7" x 12mm wide b liudezhi 2012/5/25 +/- 0.5 ps 190 ????1? ??e (c) by foxit software company, 2004 foxit pdf editor ?- od 7.5'' copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
15 packaging patent label (on bottom of box) label with cree bin code, qty, reel id label with cree bin code, qty, reel id label with cree order code, qty, reel id, po # label with cree order code, qty, reel id, po # label with cree bin code, qty, reel id unpackaged reel packaged reel boxed reel cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag p atent label label with customer order code, q t y , r eel i d , po # copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
16 bin and order-code format this document describes the product nomenclature required to select and order crees xlamp xp- e 2 color le ds. xlamp xp? e2 color leds are tested and sorted into bins which are then combined into orderable kits identifed by an order code. all xlamp l e ds are tested and sorted by color and brightness into a unique bin. e ach bin contains le ds from only one color and brightness group and is uniquely identifed by a bin code. color xlamp leds are sorted by dominant wavelength (color) and luminous or radiant fux (brightness). amber, red ? orange and red leds are additionally binned into forward voltage bins. l e ds are shipped on reels containing le ds from one bin and are always labeled with the appropriate bin code. kits contain leds from a number of similar bins and are fully defned by their order codes. a full explanation of the order codes for xlamp xp-e2 color le ds, as well as a list of standard order codes, is provided in this document. bin codes and order codes are confgured in the following manner: bin code order code sssccc- b d- hhhh- nnnnn series xpc = xp - c xpe = xp - e xpg = xp -g internal code kit number color wht = white hew = high ef ficiency white b wt = gen 2 white roy = royal blue b ry = gen 2 royal b lue b lu = blue b bl = gen 2 blue grn = green b gr = gen 2 green amb = amber rd o = red- ora nge red = red b rd = gen 2 red color specification 01 = outdoor white l 1 = standard cri h1 = 80 cri minimum p 1 = 85 cri minimum u 1 = 90 cri minimum sssccc- b d-www-ff-g- aa chromaticity bin or dominant-wa velength group luminous or radiant flux group internal code forward voltage group (amber, red -orange, red , high - eff iciency white ) color wht = white hew = high ef ficiency white b wt = gen 2 white roy = royal b lue b ry = gen 2 royal b lue b lu = blue b b l = gen 2 b lue grn = green b gr = gen 2 green amb = amber rd o = red -orange red = red b rd = gen 2 red series xpc = xp - c xpe = xp - e xpg = xp -g color specification 01 = outdoor white l 1 = standard cri h 1 = 80 cri minimum p 1 = 85 cri minimum u 1 = 90 cri minimum copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
17 performance groups C brightness xlamp x p? e2 color leds (except royal blue) are tested for luminous fux and placed into one of the following luminous? fux groups: group code min. luminous flux @ 350 ma (lm) max. luminous flux @ 350 ma (lm) j 23.5 30.6 k2 30.6 35.2 k3 35.2 39.8 m2 39.8 45.7 m3 45.7 51.7 n2 51.7 56.8 n3 56.8 62.0 n4 62.0 67.2 p2 67.2 73.9 p3 73.9 80.6 p4 80.6 87.4 q2 87.4 93.9 q3 93.9 100 q4 100 107 q5 107 114 r2 114 122 r3 122 130 r4 130 139 r5 139 148 s2 148 156 s3 156 164 performance groups C radiant flux (t j = 25 c) xlamp xt ? e2 royal blue leds are tested for radiant fux and placed into one the following bins. group code minimum radiant flux (mw) maximum radiant flux (mw) 31 (k) 475 500 32 (l) 500 525 33 (m) 525 550 34 (n) 550 575 35 (p) 575 600 36 (q) 600 625 copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
18 performance groups C dominant wavelength color xlamp leds are tested for dominant wavelength (dwl) and sorted into one of the dwl bins defned below. color dwl group min. dwl (nm) @ 350 ma max. dwl (nm) @ 350 ma royal blue d3 450 455 d4 455 460 d5 460 465 blue b3 465 470 b4 470 475 b5 475 480 b6 480 485 green g2 520 525 g3 525 530 g4 530 535 amber a2 585 590 a3 590 595 red-orange o3 610 615 o4 615 620 red r2 620 625 r3 625 630 performance groups C forward voltage amber, red-orange and red xlamp l e ds are tested for forward voltage and sorted into one of the forward voltage bins defned below. forward voltage group min. forward voltage @ 350 ma max. forward voltage @ 350 ma b 1.75 2.0 c 2.0 2.25 d 2.25 2.5 e 2.5 2.75 f 2.75 3.0 g 3.0 3.25 h 3.25 3.5 j 3.5 3.75 copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary
19 standard order codes and bins (xp-e2 color, t j = 25 c) xlamp xp-e2 led standard order codes - royal blue color minimum radiant flux @ 350 ma dominant wavelength (nm) order codes min. max. group flux (mw) group dwl (nm) group dwl (nm) royal blue 30 450 d3 450 d5 465 xp ebry ?l1?0000?00j01 d3 450 d4 460 xp ebry ?l1?0000?00j02 d4 455 d5 465 xp ebry ?l1?0000?00j03 31 475 d3 450 d5 455 xpe bry-l1-0000-00k01 d3 450 d4 460 xpe bry-l1-0000-00k02 d4 455 d5 465 xpe bry-l1-0000-00k03 32 500 d3 450 d5 455 xpe bry-l1-0000-00l01 d3 450 d4 460 xpe bry-l1-0000-00l02 d4 455 d5 465 xpe bry-l1-0000-00l03 33 525 d3 450 d5 455 xp ebry ?l1?0000?00m01 d3 450 d4 460 xp ebry ?l1?0000?00m02 d4 455 d5 465 xp ebry ?l1?0000?00m03 34 550 d3 450 d5 455 xpe bry-l1-0000-00n01 d3 450 d4 460 xpe bry-l1-0000-00n02 d4 455 d5 465 xpe bry-l1-0000-00n03 35 575 d3 450 d5 465 xpe bry-l1-0000-00p01 d3 450 d4 460 xpe bry-l1-0000-00p02 copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary * cree xlamp xp family order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity or dwl bin restrictions specifed by the order code. preliminary
20 xlamp xp-e2 led standard order codes - color color min. luminous flux (lm) @ 350 ma* dominant wavelength (nm) order codes min. max. group flux (lm) group dwl (nm) group dwl (nm) blue k2 30.6 b3 465 b6 485 xpe bbl-l1-0000-00y01 b3 465 b5 480 xpe bbl-l1-0000-00y02 b4 470 b5 480 xpe bbl-l1-0000-00y05 k3 35.2 b3 465 b6 485 xpe bbl-l1-0000-00z01 b3 465 b5 480 xpe bbl-l1-0000-00z02 b4 470 b5 480 xpe bbl-l1-0000-00z05 m2 39.8 b3 465 b6 485 xpe bbl-l1-0000-00201 b3 465 b5 480 xpe bbl-l1-0000-00202 b4 470 b5 480 xpe bbl-l1-0000-00205 m3 45.7 b3 465 b6 485 xpe bbl-l1-0000-00301 b3 465 b5 480 xpe bbl-l1-0000-00302 b4 470 b5 480 xpeblu?l1?0000?00305 green q2 87.4 g2 520 g4 535 xpe bgr-l1-0000-00a01 g2 520 g3 530 xpe bgr-l1-0000-00a02 g3 525 g4 535 xpe bgr-l1-0000-00a03 q3 93.9 g2 520 g4 535 xpe bgr-l1-0000-00b01 g2 520 g3 530 xpe bgr-l1-0000-00b02 g3 525 g4 535 xpe bgr-l1-0000-00b03 q4 100 g2 520 g4 535 xpe bgr-l1-0000-00c01 g2 520 g3 530 xpe bgr-l1-0000-00c02 g3 525 g4 535 xpe bgr-l1-0000-00c03 q5 107 g2 520 g4 535 xpe bgr-l1-0000-00d01 g2 520 g3 530 xpe bgr-l1-0000-00d02 g3 525 g4 535 xpe bgr-l1-0000-00d03 r2 114 g2 520 g4 535 xpe bgr-l1-0000-00e01 g2 520 g3 530 xpe bgr-l1-0000-00e02 g3 525 g4 535 xpe bgr-l1-0000-00e03 r3 122 g2 520 g4 535 xpe bgr-l1-0000-00f01 g2 520 g3 530 xpe bgr-l1-0000-00f02 g3 525 g4 535 xpe bgr-l1-0000-00f03 red n3 56.8 r2 620 r3 630 xpebrd-l1-0000-00501 r2 620 r2 625 xpebrd-l1-0000-00502 n4 62 r2 620 r3 630 xpebrd-l1-0000-00601 r2 620 r2 625 xpebrd-l1-0000-00602 p2 67.2 r2 620 r3 630 xpebrd-l1-0000-00701 r2 620 r2 625 xpebrd-l1-0000-00702 p3 73.9 r2 620 r3 630 xpebrd?l1?0000?00801 r2 620 r2 625 xpebrd?l1?0000?00802 standard order codes and bins (xp-e2 color, t j = 25 c) - continued copyright ? 2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp xp-e2 color leds preliminary * cree xlamp xp family order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity or dwl bin restrictions specifed by the order code. preliminary

▲Up To Search▲

Price & Availability of CLD-DSXX

	To Download CLD-DSXX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .